detector_Relay_state

uint8_t detector_Relay_state[]

extern

The state of the Detector realis is considerede. Note that this is the wanted working condition. The position of the relays could be unpredictable after a power cut.

Bit0=1 if the detector is connected to the preamplifier, Bit1=1 if the large load resistors are used, Bit2=1 if the external bias is selected, Bit3=1 if the detector bias is inverted

uint8_t detector_Relay_state[12]; /*!<  this are the replica of the flags used of the relay at detector_Relay_flags_setting*/

this are the replica of the flags used of the relay at detector_Relay_flags_setting

Definition at line 268 of file Detector_Bias.c.